634
Rectification tower regards chemical industry as equipment and character, besides can be applied in actual manufacturing occasion, the height that still can have part in the lab is detached. Because the side focal point of utility is different, so tower of these two kinds of rectify also can differ somewhat, it is for instance in the lab, commonly used is vitreous rectify tower. It is the simple introduction after disintegrate of tower of this kind of rectify below, the understanding with believe to be able to help great master better this kind of equipment.
The tower of vitreous rectify tower is vitreous rectify column, there is irregular adjustment in its back, achieve thereby pass goodly qualitative. Among them the effective detached length that the height of filling layer is rectification column, to come true good current, can have section to filling layer. It is under the influence of all sorts of elements, the filling dimension of rectification column is less than column diameter commonly very one of, with requirement of up to mark. What boiler of tower of tower of rectify of this kind of glass uses is flask of flat bottom flask or round bottom, but if looking than coming, the effect of 3 necks flask of short still neck is ideal. What place in bottle is to stay separate matter, the amount also cannot exceed 2/3 of bottle cubage more, avoid the generation of undesirable phenomenon. Besides, the part that remain is rectification head, also be the join between column of the rectify in rectification tower and condenser, basically use a function that arrives to adjust and measure circumfluence to compare. To the rectification device that the lab uses, what use commonly is the rectification head of complete condensation, easier implementation uses the effect while the structure is simple.