Biodiesel Production Line On the waste oil refining equipment of the confession£¬There are waste oil, plastic oil, tire oil catalytic reaction can produce qualified vehicle diesel, a greater profit. The primary task for customers who want to launch an oil refinery project is to improve the "refining equipment". That is environmentally friendly, safe, energy-efficient oil refining equipment. Only the oil refining equipment, but no mature oil refining technology, but also the production of qualified diesel. So every day a small refinery closed closed.
Practice shows that: whether to refining qualified diesel and oil refining equipment is not great, and the catalyst also has a decisive relationship.Customers who want to come to the oil refinery program please note that you should pay more attention to whether there is a mature refinery technology for refinery equipment refinery equipment. If they do not produce qualified diesel, then the product is at best bought a pile of scrap metal home.
Here we restore the domestic new customer-made equipment must be Mongolian process: (with waste oil refining diesel for example)
New customers often do not understand the oil refining, just feel profitable, so decided to launch. For example, new customers will bring waste oil to the processing of oil refining equipment manufacturers, so that they do the test to see if it can make a good diesel. Many equipment manufacturers will follow the following procedures:
First put the waste oil into the experimental distillation bottle, and then pretended to add some additives in the waste oil, began to distillation, and then through the condenser liquefied oil. Please note that they will always be in the distillation close to half, will find a variety of reasons to stop the distillation. Because the re-distillation temperature will be high, high temperature out of heavy oil, the color crimson, smell, the surface green hair blue, viscosity is also large, the appearance is oil, obviously, this oil is not diesel The If the big production to make this oil is not good to sell the price, certainly lose money. This is why there is always a small domestic refinery every day the reasons for the shutdown.
Equipment manufacturers in half the reason to stop the distillation is: If you continue to heat up the distillation, then the latter half are out of oil, dark color, smell, is not what we want diesel. They are added in the oil are basically sodium hydroxide and alumina, is not a catalyst, in fact, plus and no one are like. Because these raw materials are not any catalytic effect. They are just in front of new customers Guicheng virtual.
Why are they why they will be tested for a variety of reasons when they are distilled to half?
Because the waste oil before heating 300 degrees before the steaming part of the gasoline and diesel, which is the waste oil itself contains light oil. Because the new oil in the course of the use of a long time mixed with gasoline and diesel, resulting in decreased oil viscosity, can not achieve the role of lubrication, it was abandoned into waste oil. So they only waste oil mixed with gasoline and diesel steamed out by heating; add some chemical raw materials because the reason is to let new customers mistakenly think that their additives play a role in refining. Because this part of the nature of light oil is very close to diesel molecules, so after sand filtration, the appearance of light yellow, the smell is also better. New customers because they do not understand, it is easy to fooled.
The second half of the non-steaming is heavy oil, that is, the oil component, must be steamed at a higher temperature. But because they do not have the catalyst of the core technology, so if the experiment continues to do so, the latter part of the oil are out, the surface of the green, dark red color, viscosity. And the real purpose of our refining is to this part of the heavy oil cracking into a small viscosity of diesel, in order to achieve all the waste oil into diesel. While the equipment manufacturers have deliberately save the most important step. In fact, this step is the key to refining the key technology. Whether a new refinery can survive the key to see this step technology stalemate.
We think about it, if the equipment from such manufacturers to return to production, it is finished half of the time to end it? Is a furnace installed 10 tons of waste oil, refining 5 tons is not refining it?
This kind of human nature of the trick in many equipment manufacturers popular. Unscrupulously harm the interests of customers. We learned that the production of all the customers were so overshadowed, resulting in post-production production is not a good oil, complain bitterly.
Even more ridiculous is: for the early distillation of the light oil is still used to filter the sand, and will not use a small chemical loss of treatment. Do oil friends know: sand on the oil decolorization only filter, the treatment process without any technical content at all. Sand eat oil is very powerful, great loss. So they do the test, the yield of oil there is no way to calculate, often the yield of less than 50% oil. Such a production process is doomed to failure.
For the above trick, as long as the new customers read this profile, it is estimated that the output will never be fooled.
If you want to finish all the waste oil, and refining the oil without the national standard diesel, you must have "refining catalyst" the core technology.
Refining equipment is made of steel by a certain shape of the welding, there is no technology at all, but the equipment process is different. So the price of oil refining equipment should not be high outrageous. If there is no mature oil refining technology, a single purchase of oil refining equipment is also ineffective.
I plant the production of oil refining equipment refining furnace, suitable for waste oil refining, waste plastic oil refining diesel, waste tire oil refining diesel, coal tar refining diesel oil, vegetable oil refining diesel project. The equipment itself is unique structure, the coal cost is very low, the heating speed is quick, the cooling speed is quick, the production cycle is short, completely solves the current market structure of the equipment aging, insecurity, one or two months the steel plate is burned with corrosion loopholes Burn the shortcomings of the explosion. The use of continuous production equipment, environmental protection, safety, energy saving, production, product quality, high yield.
I ordered the factory production of oil refining equipment refinery, I plant will send professional and technical personnel to install, commissioning, hand in hand to teach oil refining technology, until the customer completely hold the technology to produce qualified diesel so far.
I plant the first batch of oil refining equipment has been in the country for safe operation for many years, there is no problem with a furnace for the enterprise to create a huge wealth. The success of these enterprises production site, the new production of the customer can go to visit the study, exchange.I plant the production of oil refining equipment Refinery is divided into two series: one is a single furnace refining, intermittent production, suitable for small-scale production. The other is continuous production, suitable for large-scale production. All the equipment cost transparency, fair prices, quality assurance, with environmental protection, pollution-free, efficient, energy-saving advantages. Welcome new customers to the workshop on-site negotiations.
Finally, sum up: the most critical point of oil refining is: First, the safety of equipment; Second, the oil quality is good, that is, the first drop of oil to the last drop of oil without heavy oil; Third, the smell of pure diesel flavor, Smell. Four is the high yield, not less than 85%, so refining the oil decolorization must not use sand filter. Otherwise the loss is too great.
Only to do the above four points, customers can have profits.
Welcome new and old friends at home and abroad to plant inspection, to discuss cooperation matters.Biodiesel Production Line On the waste oil refining equipment of the confession.